Introduction

Whether you use Git or Mercurial, use this section to generate an SSH key using Sourcetree. When you create an SSH key with Sourcetree on macOS, you can only create one key. You'll need to use the command line if you want additional keys. Generate SSH Key Open your terminal and enter the following command to generate a key: ssh-keygen This command works. Unless you have reason to change it, leave the default location of /.ssh/idrsa. A passphrase is recommended to provide greater security, but can conflict with tools. Jun 13, 2019.

Establishing an SSH (Secure Shell) connection is essential to log in and effectively manage a remote server. Encrypted keys are a set of access credentials used to establish a secure connection.

This guide will walk you how to generate SSH keys on Ubuntu 18.04. We will also cover setting up SSH key-based authentication to connect to a remote server without requiring a password.

• A server running Ubuntu 18.04
• A user account with sudo privileges
• Access to a terminal window / command line (Ctrl-Alt-T)

If you are already running an Ubuntu 18.04 server, you can skip this step. If you are configuring your server for the first time, you may not have SSH installed.

1. Start by installing the tasksel package:

The system will first ask for confirmation before proceeding:

2. Next, use tasksel to install the ssh-server:

3. Load the SSH server service, and set it to launch at boot:

On your client system – the one you’re using to connect to the server – you need to create a pair of key codes.

To generate a pair of SSH key codes, enter the commands:

This will create a hidden directory to store your SSH keys, and modify the permissions for that directory. The ssh-keygen command creates a 2048-bit RSA key pair.

For extra security, use RSA4096:

If you’ve already generated a key pair, this will prompt to overwrite them, and those old keys will not work anymore.

The system will ask you to create a passphrase as an added layer of security. Input a memorable passphrase, and press Enter.

This process creates two keys. One is a public key, which you can hand out to anyone – in this case, you’ll save it to the server. The other one is a private key, which you will need to keep secure. The secure private key ensures that you are the only person who can encrypt the data that is decrypted by the public key.

Step 2- Copy Public Key to the Ubuntu Server

First, get the IP address of the Ubuntu server you want to connect to.

In a terminal window, enter:

The system’s IP address is listed in the second entry:

On the client system, use the ssh-copy-id command to copy the identity information to the Ubuntu server:

Replace server_IP with the actual IP address of your server.

If this is the first time you’re connecting to the server, you may see a message that the authenticity of the host cannot be established:

Type yes and press Enter.

The system will check your client system for the id_rsa.pub key that was previously generated. Then it will prompt you to enter the password for the server user account. Type it in (the system won’t display the password), and press Enter.

The system will copy the contents of the ~/.ssh/id_rsa.pub from the client system into the ~/.ssh/authorized_keys directory of the server system.

The system should display:

If your system does not have the ssh-copy-id command, you can copy the key manually over the SSH.

Use the following command:

To log in to a remote server, input the command:

The system should not ask for a password as it is negotiating a secure connection using the SSH keys. If you used a security passphrase, you would be prompted to enter it. After you do so, you are logged in.

If this is the first time you’ve logged into the server, you may see a message similar to the one in part two. It will ask if you are sure you want to connect – type yes and press Enter.

Step 4- Disable Password Authentication

This step creates an added layer of security. If you’re the only person logging into the server, you can disable the password. The server will only accept a login with your private key to match the stored public key.

Edit the sshd_config file:

Search the file and find the PasswordAuthentication option.

Edit the file and change the value to no:

Save the file and exit, then restart the SSH service:

Verify that SSH is still working, before ending the session:

If everything works, you can close out and resume work normally.

By following the instructions in this tutorial, you have setup SSH-key-based authentication on an Ubuntu 18.04 server.

The connection is now highly secure as it uses a set of unique, encrypted SSH keys.

Next you should also read

Learn how to set up SSH key authentication on CentOS to safely communicate with remote servers. Create the…

When establishing a remote connection between a client and a server, a primary concern is ensuring a secure…

Nginx is an open-source server utility designed to work as a reverse proxy, intercepting client requests and…

In this tutorial, Find out How To Use SSH to Connect to a Remote Server in Linux or Windows. Get started with…

-->

Azure Repos Azure DevOps Server 2019 TFS 2018 TFS 2017 TFS 2015 Update 3

Connect to your Git repos through SSH on macOS, Linux, or Windows to securely connect using HTTPS authentication. On Windows, we recommended the use of Git Credential Managers or Personal Access Tokens.

Important

SSH URLs have changed, but old SSH URLs will continue to work. If you have already set up SSH, you should update your remote URLs to the new format:

• Verify which remotes are using SSH by running git remote -v in your Git client.
• Visit your repository on the web and select the Clone button in the upper right.
• Select SSH and copy the new SSH URL.
• In your Git client, run: git remote set-url <remote name, e.g. origin> <new SSH URL>. Alternatively, in Visual Studio, go to Repository Settings, and edit your remotes.

Note

As of Visual Studio 2017, SSH can be used to connect to Git repos.

How SSH key authentication works

SSH public key authentication works with an asymmetric pair of generated encryption keys. The public key is shared with Azure DevOps and used to verify the initial ssh connection. The private key is kept safe and secure on your system.

Set up SSH key authentication

The following steps cover configuration of SSH key authentication on the following platforms:

• Linux
• macOS running at least Leopard (10.5)
• Windows systems running Git for Windows

Configure SSH using the command line. bash is the common shell on Linux and macOS and the Git for Windows installation adds a shortcut to Git Bash in the Start menu.Other shell environments will work, but are not covered in this article.

Step 1: Create your SSH keys

Note

If you have already created SSH keys on your system, skip this step and go to configuring SSH keys.

The commands here will let you create new default SSH keys, overwriting existing default keys. Before continuing, check your~/.ssh folder (for example, /home/jamal/.ssh or C:Usersjamal.ssh) and look for the following files:

• id_rsa
• id_rsa.pub

If these files exist, then you have already created SSH keys. You can overwrite the keys with the following commands, or skip this step and go to configuring SSH keys to reuse these keys.

Create your SSH keys with the ssh-keygen command from the bash prompt. This command will create a 2048-bit RSA key for use with SSH. You can give a passphrasefor your private key when prompted—this passphrase provides another layer of security for your private key.If you give a passphrase, be sure to configure the SSH agent to cache your passphrase so you don't have to enter it every time you connect.

This command produces the two keys needed for SSH authentication: your private key ( id_rsa ) and the public key ( id_rsa.pub ). It is important to never share the contents of your private key. If the private key iscompromised, attackers can use it to trick servers into thinking the connection is coming from you.

Step 2: Add the public key to Azure DevOps Services/TFS

Associate the public key generated in the previous step with your user ID.

1. Open your security settings by browsing to the web portal and selecting your avatar in the upper right of theuser interface. Select Security in the menu that appears.

2. Select SSH public keys, and then select + New Key.

3. Copy the contents of the public key (for example, id_rsa.pub) that you generated into the Public Key Data field.

   Important

   Avoid adding whitespace or new lines into the Key Data field, as they can cause Azure DevOps Services to use an invalid public key. When pasting in the key, a newline often is added at the end. Be sure to remove this newline if it occurs.

4. Give the key a useful description (this description will be displayed on the SSH public keys page for your profile) so that you can remember it later. Select Save to store the public key. Once saved, you cannot change the key. You can delete the key or create a new entry for another key. There are no restrictions on how many keys you can add to your user profile.

Step 3: Clone the Git repository with SSH

Note

To connect with SSH from an existing cloned repo, see updating your remotes to SSH.

1. Copy the SSH clone URL from the web portal. In this example, the SSL clone URL is for a repo in an organization named fabrikam-fiber, as indicated by the first part of the URL after dev.azure.com.

   Note

   Project URLs have changed with the release of Azure DevOps Services and now have the format dev.azure.com/{your organization}/{your project}, but you can still use the existing visualstudio.com format. For more information, see VSTS is now Azure DevOps Services.

2. Run git clone from the command prompt.

SSH may display the server's SSH fingerprint and ask you to verify it.

For cloud-hosted Azure DevOps Services, where clone URLs contain either ssh.dev.azure.com or vs-ssh.visualstudio.com, the fingerprint should match one of the following formats:

• MD5: 97:70:33:82:fd:29:3a:73:39:af:6a:07:ad:f8:80:49 (RSA)
• SHA256: SHA256:ohD8VZEXGWo6Ez8GSEJQ9WpafgLFsOfLOtGGQCQo6Og (RSA)These fingerprints are also listed in the SSH public keys page.

For self-hosted instances of Azure DevOps Server, you should verify that the displayed fingerprint matches one of the fingerprints in the SSH public keys page.

SSH displays this fingerprint when it connects to an unknown host to protect you from man-in-the-middle attacks.Once you accept the host's fingerprint, SSH will not prompt you again unless the fingerprint changes.

When you are asked if you want to continue connecting, type yes. Git will clone the repo and set up the origin remote to connect with SSH for future Git commands.

Tip

Avoid trouble: Windows users will need to run a command to have Git reuse their SSH key passphrase.

Questions and troubleshooting

Q: After running git clone, I get the following error. What should I do?

Host key verification failed.fatal: Could not read from remote repository.

A: Manually record the SSH key by running:ssh-keyscan -t rsa domain.com >> ~/.ssh/known_hosts

Q: How can I have Git remember the passphrase for my key on Windows?

A: Run the following command included in Git for Windows to start up the ssh-agent process in Powershell or the Windows Command Prompt. ssh-agent will cacheyour passphrase so you don't have to provide it every time you connect to your repo.

If you're using the Bash shell (including Git Bash), start ssh-agent with:

Q: I use PuTTY as my SSH client and generated my keys with PuTTYgen. Can I use these keys with Azure DevOps Services?

A: Yes. Load the private key with PuTTYgen, go to Conversions menu and select Export OpenSSH key.Save the private key file and then follow the steps to set up non-default keys.Copy your public key directly from the PuTTYgen window and paste into the Key Data field in your security settings.

Generate Ssh Key Putty

Q: How can I verify that the public key I uploaded is the same key as I have locally?

A: You can verify the fingerprint of the public key uploaded with the one displayed in your profile through the following ssh-keygen command run against your public key usingthe bash command line. You will need to change the path and the public key filename if you are not using the defaults.

You can then compare the MD5 signature to the one in your profile. This check is useful if you have connection problems or have concerns about incorrectlypasting in the public key into the Key Data field when adding the key to Azure DevOps Services.

Q: How can I start using SSH in a repository where I am currently using HTTPS?

A: You'll need to update the origin remote in Git to change over from a HTTPS to SSH URL. Once you have the SSH clone URL, run the following command:

You can now run any Git command that connects to origin.

Q: I'm using Git LFS with Azure DevOps Services and I get errors when pulling files tracked by Git LFS.

A: Azure DevOps Services currently doesn't support LFS over SSH. Use HTTPS to connect to repos with Git LFS tracked files.

Q: How can I use a non default key location, i.e. not ~/.ssh/id_rsa and ~/.ssh/id_rsa.pub?

A: To use keys created with ssh-keygen in a different place than the default, you do two things:

1. The keys must be in a folder that only you can read or edit. If the folder has wider permissions, SSH will not use the keys.
2. You must let SSH know the location of the keys. You make SSH aware of keys through the ssh-add command, providing the full path to the private key.

On Windows, before running ssh-add, you will need to run the following command from included in Git for Windows:

This command runs in both Powershell and the Command Prompt. If you are using Git Bash, the command you need to use is:

You can find ssh-add as part of the Git for Windows distribution and also run it in any shell environment on Windows.

On macOS and Linux you also must have ssh-agent running before running ssh-add, but the command environment on these platforms usuallytakes care of starting ssh-agent for you.

Q: I have multiple SSH keys. How do I use different SSH keys for different SSH servers or repos?

A: Generally, if you configure multiple keys for an SSH client and connect to an SSH server, the client can try the keys one at a time until the server accepts one.

However, this doesn't work with Azure DevOps for technical reasons related to the SSH protocol and how our Git SSH URLs are structured. Azure DevOps will blindly accept the first key that the client provides during authentication. If that key is invalid for the requested repo, the request will fail with the following error:

For Azure DevOps, you'll need to configure SSH to explicitly use a specific key file. One way to do this to edit your ~/.ssh/config file (for example, /home/jamal/.ssh or C:Usersjamal.ssh) as follows: Download endnote for mac student.

Q: What notifications may I receive about my SSH keys?

A: Whenever you register a new SSH Key with Azure DevOps Services, you will receive an email notification informing you that a new SSH key has been added to your account.

Q: What do I do if I believe that someone other than me is adding SSH keys on my account?

Generate Ssh Key In Command Line

A: If you receive a notification of an SSH key being registered and you did not manually upload it to the service, your credentials may have been compromised.

Generate Ssh Key Windows Command Line

The next step would be to investigate whether or not your password has been compromised. Changing your password is always a good first step to defend against this attack vector. If you’re an Azure Active Directory user, talk with your administrator to check if your account was used from an unknown source/location.